Couldn't confirm presence of Flash 7 or higher because JavaScript was disabled.
We highly recommend that you install Flash 7 or higher and that you enable JavaScript.
Get Flash
---
I really do have Flash installed.
What follows is a plain HTML version of the puzzle.
Router Puzzle 2
1
2
3
4
5
6
7
8
9
10
Across
3. When molding irregular shapes with a piloted bit use a ________ as a fulcrum pin to support the work piece.
5. When cutting a rabbet joint with a straight bit the diameter of the bit should be at least ______ the size of the rabbet joint.
6. Never use _____bits.
7. You should keep all _________bits apart when storing.
8. The first cut to be made when shaping a board is to cut ________ the grain.
10. When setting up a bit with a bearing and a fence you should __________ the bearing to the fence edge.
Down
1. When setting up router fence you clamp the ________ first.
2. When installing a router bit you first_______the router.
4. When cutting a dado be sure to use a _______ for support.
9. To make a groove you cut ______ the grain.